Trait ChannelEnable 

pub trait ChannelEnable<const C: u8>: Instance {
    // Required methods
    fn set_chxen(&mut self, on: bool);
    fn set_chxie(&mut self, on: bool);
    fn read_chxie(&self) -> bool;
    fn read_chxif(&self) -> bool;
    fn clear_chxif(&mut self);
}

The switch turning channel C on, whichever direction it points.

CHxEN releases the output on a compare channel and arms the latch on a capture one. Implemented for the timer/channel pairs that exist: TIMER13 has channel 0 alone, TIMER5 none at all.

Required Methods

fn set_chxen(&mut self, on: bool)

Enables or disables the channel, leaving its setup in place.

fn set_chxie(&mut self, on: bool)

Lets this channel’s event through to the NVIC. The flag is raised either way, and every channel shares the timer’s one interrupt line.

fn read_chxie(&self) -> bool

Whether this channel’s event reaches the NVIC.

fn read_chxif(&self) -> bool

Channel flag — a capture latched or a compare matched, depending on the role the channel is in. Set by hardware, never cleared by it.

fn clear_chxif(&mut self)

Clears the channel flag.

Dyn Compatibility

This trait is not dyn compatible.

In older versions of Rust, dyn compatibility was called "object safety".

Implementations on Foreign Types

impl ChannelEnable<0> for Timer0

fn set_chxen(&mut self, on: bool)

fn set_chxie(&mut self, on: bool)

fn read_chxie(&self) -> bool

fn read_chxif(&self) -> bool

fn clear_chxif(&mut self)

impl ChannelEnable<0> for Timer2

fn set_chxen(&mut self, on: bool)

fn set_chxie(&mut self, on: bool)

fn read_chxie(&self) -> bool

fn read_chxif(&self) -> bool

fn clear_chxif(&mut self)

impl ChannelEnable<0> for Timer13

fn set_chxen(&mut self, on: bool)

fn set_chxie(&mut self, on: bool)

fn read_chxie(&self) -> bool

fn read_chxif(&self) -> bool

fn clear_chxif(&mut self)

impl ChannelEnable<0> for Timer15

fn set_chxen(&mut self, on: bool)

fn set_chxie(&mut self, on: bool)

fn read_chxie(&self) -> bool

fn read_chxif(&self) -> bool

fn clear_chxif(&mut self)

impl ChannelEnable<0> for Timer16

fn set_chxen(&mut self, on: bool)

fn set_chxie(&mut self, on: bool)

fn read_chxie(&self) -> bool

fn read_chxif(&self) -> bool

fn clear_chxif(&mut self)

impl ChannelEnable<1> for Timer0

fn set_chxen(&mut self, on: bool)

fn set_chxie(&mut self, on: bool)

fn read_chxie(&self) -> bool

fn read_chxif(&self) -> bool

fn clear_chxif(&mut self)

impl ChannelEnable<1> for Timer2

fn set_chxen(&mut self, on: bool)

fn set_chxie(&mut self, on: bool)

fn read_chxie(&self) -> bool

fn read_chxif(&self) -> bool

fn clear_chxif(&mut self)

impl ChannelEnable<2> for Timer0

fn set_chxen(&mut self, on: bool)

fn set_chxie(&mut self, on: bool)

fn read_chxie(&self) -> bool

fn read_chxif(&self) -> bool

fn clear_chxif(&mut self)

impl ChannelEnable<2> for Timer2

fn set_chxen(&mut self, on: bool)

fn set_chxie(&mut self, on: bool)

fn read_chxie(&self) -> bool

fn read_chxif(&self) -> bool

fn clear_chxif(&mut self)

impl ChannelEnable<3> for Timer0

fn set_chxen(&mut self, on: bool)

fn set_chxie(&mut self, on: bool)

fn read_chxie(&self) -> bool

fn read_chxif(&self) -> bool

fn clear_chxif(&mut self)

impl ChannelEnable<3> for Timer2

fn set_chxen(&mut self, on: bool)

fn set_chxie(&mut self, on: bool)

fn read_chxie(&self) -> bool

fn read_chxif(&self) -> bool

fn clear_chxif(&mut self)

Implementors